Debug RAS Command
Usage Guidelines
Use the debug ras command to display the types and addressing of RAS messages sent and received. The debug output lists the message type using mnemonics defined in International Telecommunications Union-Telecommunication (ITU-T) specification H.225.
Examples
Practical Example
In the following output, gateway GW13.cisco.com sends a RAS registration request (RRQ) message to gatekeeper GK15.cisco.com at IP address 10.9.53.15. GW13.cisco.com then receives a registration confirmation (RCF) message from the gatekeeper.
If there is no response, it could mean that the gatekeeper is offline or improperly addressed.
If you receive a reject (RRJ) message, it could mean that the gatekeeper is unable to handle another gateway or that the registration information is incorrect.
Router# debug ras
*Mar 13 19:53:34.231: RASlib::ras_sendto:msg length 105 from 10.9.53.13:8658 to 10.9.53.15:1719
*Mar 13 19:53:34.231: RASLib::RASSendRRQ:RRQ (seq# 36939) sent to 10.9.53.15
*Mar 13 19:53:34.247: RASLib::RASRecvData:successfully rcvd message of length 105 from 10.9.53.15:1719
*Mar 13 19:53:34.251: RASLib::RASRecvData:RCF (seq# 36939) rcvd from [10.9.53.15:1719] on sock [0x6168356C]
